ATEX accessories is necessary to provide accurate operation of various gas or flame detection fixed systems used in potentially explosive areas. cable glands , manual switches , junction boxes , glass breaker boxes or independent lighting Regardless, ATEX accessories are essential complements for the proper operation of installations in classified areas and compliance with applicable standards.
Gas solenoid valves (literally called gas safety solenoid valves) are often associated with gas detection controllers in boiler rooms or any installations using gas burners. By operating in positive safety mode, they ensure that the gas supply is cut off due to lack of voltage. In addition to gas solenoid valves, we offer a range of accessories for AIR/GAS lines such as pressure switches, pressure gauges or safety boxes.
Safety gas solenoid valve – operation
A gas safety valve or gas solenoid valve is an essential unit for any gas installation. When a gas leak is detected, gaz algılama kontrolörü It will turn off the power supply to the gas solenoid valve through a closed relay. This lack of voltage will then close the gas safety valve (EN161 standard).
All our safety valves contain an ATEX solenoid coil and are available with a variety of voltages from 12 V to 240 VAC. 240 VAC units are available in stock .
Manual or automatic solenoid valve
Electronic gas valves are of two types: Manual solenoid valve And automatic safety valve .
Manual reset safety valve
Manual reset safety valve, automatically shuts down due to lack of voltage (closing of the solenoid valve). It remains closed until the operator comes to reset the solenoid valve with manual override. This is usually a push button or a lock system that is triggered to release valve closure.
automatic safety valve
As for the manual reset solenoid valve, automatic safety valve It is a safety unit that shuts down due to lack of voltage. Unlike a manual reset valve, an automatic gas solenoid valve opens and closes when voltage returns. Therefore, the closing of the gas valve does not correct itself.
Air/gas line accessories
Shut-off or relief valve
safety valves They are the first elements of an AIR/GAS line. Available with or without lock. This very important safety unit ensures that the gas supply is shut off in a strategic location.
gas pressure switch
One gas pressure switch It is also a safety unit. They control the presence of gas (mini gas pressure switch) or gas overpressure (maxi gas pressure switch) and act directly on the system safety loop…
safety box
The best location for a general gas solenoid valve is outside the building, in a security box It is protected inside. Thanks to its color (red) and key locking system, the security box is protected against weather conditions and malicious behavior.
iNet ® solutions your portable gas detection fleet manage and track These are simple and powerful ways to . This service protects employees from gas hazards. To ensure maximum security of devices a basic analysis Provides (alarm duration, behaviors, gas calibration tracking…).
Managing a gas detection fleet is complex! The devices must be maintained, periodically checked and serviced (filter or gas detection sensor replacement). iNet ® solutions , iNet ® Exchange And iNet ® control Their software is specifically tailored to manage all these issues at a fixed cost.
iNet ® solutions: gas detection ALL INCLUSIVE solution
iNet ® Exchange:
iNet ® Exchange, is a subscription-based service that includes gas detector repair, replacement and service. It greatly simplifies any gas detection program: device availability, cost and ownership.
iNet ® With the Exchange solution, all your gas detectors are functional and working:
- Dynamic switching of your devices, usually within 48 hours
- No additional purchases (spare device, spare parts, calibration gas)
- Warranty return period savings
No unexpected costs on your gas detectors:
- iNet ® Exchange No initial investment required to implement .
- Fixed monthly cost
- No additional purchases required to automatically receive replacement devices
iNet ® Control:
iNet ® control, is a management and monitoring software for your gas detection fleet. iNet ® As part of their solution software, your devices provide a view of your users' behavior from anywhere and across multiple supports (computer, tablet, smartphone). iNet ® Control Access does not incur additional charges.
Daily hazards your employees face tracking and reducing
- Easy-to-read alarm event summary reports including time, location and users
- Track alarm event trends over time with customizable charts.
- Review and filter stored data by device, user or alarm event
- Get customized summary reports based on the most important data
Direct view of how gas detectors are used to take appropriate corrective action
- Monitor each gas detector usage and employee behavior
- Evaluate how users react during alarm events
- View full data records to see what hazards workers are exposed to
Easy maintenance and compliance management of gas detection equipment
- Set timelines for crash tests and calibrations
- Easy-to-read crash test or calibration certificates
iNet ® Now :
iNet ® Now, It is a live monitoring software that provides real-time email and mobile text messages to alert you to any gas hazard incidents, panic or man down situations. This is iNet ® solution allows you to quickly see and take appropriate corrective actions during incidents. A map also shows users' location.
Real-time verification of employees' status and location
- Real-time employee location and gas exposure tracking
- Instant alert notifications for better responsiveness (high alert, man in distress)
Improvement of gas detection program
- Creation of equipment groups for live monitoring of devices
- Security incident reporting with real-time tracking
- Map localization thanks to LENS™ Wireless technology
In this area you can find Dräger's range of drug and alcohol tests. From simple electronic breathalyzers for home use to more sophisticated professional devices (law enforcement checks, workplace worker safety in industry or construction sites, access controls in the workplace, stadiums, public transportation, etc.) and drug testing (amphetamines, marijuana, cocaine, ecstasy, opiates and benzodiazepines ) much.
Dräger drug and alcohol testing equipment, has been assisting law enforcement with roadside checks for years and can be used in legal proceedings. They also help improve the safety of workers in the workplace, whether in industry, on a construction site or when using agricultural machinery.
Dräger Electronic Breathalyzer
Alcohol is one of the most common causes of accidents on roads and in workplaces. Electronic breathalyser, It is an important tool for improving safety by helping to prevent injuries, property damage and even loss of reputation that can result from excessive alcohol consumption.
Per year With over 30 million breath tests Dräger , in alcohol test is the undisputed world leader. Dräger electronic breathalyzers It is fast, hygienic and guarantees reliable and accurate results. In many countries, law enforcement agencies use the Alcotest series on a daily basis for roadside checks.
Compact and easy to use Dräger electronic breathalyzers It uses non-invasive measurement technology with a high degree of hygiene for both the user and the person being tested. In general, calibration of breathalyzers is required every six months. For calibration of electronic breathalyzers or gas testing, a wide range of disposable bottles are available. calibration gas range (in this case We offer ethanol).
saliva drug tests
Drug use is completely prohibited in France. saliva drug test It can be done in various contexts: during roadside checks, inside companies or during self-testing.
Dräger DrugCheck 3000 saliva drug test, Can detect up to six substances simultaneously in a single test: cocaine , opiates , amphetamines , synthetic drugs ( methamphetamines , ecstasy , MDMA etc.), benzodiazepines (such as some prescription drugs) and marijuana (THC).
Calibration Gas Gas detectors or devices such as chromatographs, gas analyzers, breathalyzers or MAP analyzers periodic checks , crash tests And calibrations To perform, disposable with calibration gas cylinders a very wide calibration gas We offer a range of . this gas
calibration gas
Calibration Gas The current product range ranges from classic LEL binary mixtures to very low concentrations (a few ppm) used in laboratories. multiple and It covers a wide range from complex gas mixtures. This calibration gases mixed gravimetrically and Complies with ISO6142 standard . This process ensures high accuracy of concentrations and optimum shelf life of the calibration gas cylinders.
Calibration Gas Gaz karışımları öncelikli olarak sabit gaz monitörleri veya taşınabilir gaz dedektörü kalibrasyonu ve kontrolü için kullanılır (taşınabilir dedektörler ayrıca standart bir gaz silindiri ile çarpma testine tabi tutulur) ancak birçok başka uygulama için de kullanılır. Gaz kromatografisi, tarımsal gıda atmosfer analizi, tıbbi gaz analizi, alkolmetreler ve kilitlemeli alkol nefes ölçüm sistemleri, çevresel izleme vb. için kullanılabilirler .
Calibration Gas Thanks to its partnership with Air Products, GTC Industrial can offer its customers perfectly tailored solutions with a wide range of calibration gas mixtures and high purity gases to meet all requirements.
Learn more about gas detector calibration and maintenance.
The main calibration gases available (excluding mixtures):
| Acetylene – C2H2 | Ammonia – NH3 | Argon – Ar |
| Nitrogen – N2 | Benzene – C6H6 | Butadiene – C4H6 |
| Butane – C4H10 | Chlorine – Cl2 | Vinyl chloride C2H3Cl |
| Hydrogen chloride – HCl | Hydrogen cyanide – HCN | Nitrogen dioxide – NO2 |
| Carbon dioxide – CO2 | Sulfur dioxide – SO2 | Ethane – C2H6 |
| Ethanol – C2H6O | Helium – O | Heptane – C7H16 |
| Sulfur hexafluoride – SF6 | Hexane – C6H14 | Hydrogen – H2 |
| Isobutane – C4H10 | Methane – CH4 | Nitric oxide – NO |
| Carbon monoxide – CO | Ethylene oxide – C2H4O | Oxygen – O2 |
| Pentane – C5H12 | Phosphine – PH3 | Propane – C3H8 |
| Propylene – C3H6 | Nitrogen oxide – N2O | Silane – SiH4 |
| Hydrogen sulfide – H2S | Toluene – C7H8 | Refrigerant R123 |
| Freon R1234YF | Freon R134A | Refrigerant R14 |
| Freon R143A | Freon R22 | Refrigerant R23 |
| Freon R404A | Freon R407A | Refrigerant R407D |
| Freon R410A | Freon R422D | Refrigerant R507 |
- Wide range of standard and customized mixes
- Gravimetric mixes for optimum accuracy
- Mixtures of 2 to 6 gases
Calibration gas cylinder features:
| Cylinder gas capacity | 34 liters | 56 liters | 110 liters |
| Water capacity (liter) | 0,9 | 1.6 | 1.6 |
| Bar pressure (PSIG) | 34 (500) | 34 (500) | 69 (1000) |
| Size in millimeters (hx Ø) | 281×74 | 359×90 | 359×90 |
| Curb weight (kg) | 0,56 | 1.12 | 1.12 |
| outlet valve | 5,8″ – 18 UNF – C10 | ||
| Regulatory compliance | EN 12205* | ||
* The EN 12205 standard requires that disposable calibration gas cylinders be equipped with a special valve according to the EN 13340 standard
- Calibration gas cylinders complying with current European regulation
- Analysis and calibration certificate provided automatically
- Portable, convenient and easy to use
- Full range of equipment and accessories
- No rental fee
monitor calibration rollers all ISO6142 compliant .
Calibration gas cylinder flow regulator
⇒ 5,8 » – 18 UNF – C10 konnektörü
⇒ Constant gas flow of 0.5 liters/minute (other constant flows on request)
⇒ Two versions available: conventional or STAINLESS STEEL for corrosive gases (NH3, Cl2, HCN…)
⇒ Cylinder content indicator with flow regulator manometer
S-Flow type valve with adjustable flow rate
⇒ 5,8 » – 18 UNF – C10 konnektörü
⇒ Customizable gas flow from 0 to 1.0 liters/minute
⇒ Floating bead indicator for easy use
⇒ Cylinder content indicator with flow regulator manometer
Push flow regulator for standard gas
⇒ 5,8 » – 18 UNF – C10 konnektörü
⇒ Constant flow rate of 0.5 liters/minute (other constant flow rates on request)
⇒ Floating bead indicator for easy use
⇒ Cylinder content indicator with flow regulator manometer
Demand flow editor
⇒ 5,8 » – 18 UNF – C10 konnektörü
⇒ Designed for calibration stations with automatic pump
⇒ Two versions available: conventional or STAINLESS STEEL for corrosive gases (NH3, Cl2, HCN…)
⇒ Cylinder content indicator with flow regulator manometer
Others for calibration gas accessories
⇒ Sturdy carrying case for 2 rollers
⇒ Soft carrying case for 3 rollers
⇒ Wall bracket for calibration gas cylinders
⇒ Recycling tools to even eliminate pressure in the empty calibration gas cylinder
Daha Fazla Bilgi İçin Blog Sayfamıza Göz Atabilirsiniz
Tags
Argon Gazı Ölçüm Cihazı
Argon Gazı Ölçüm Cihazı Fiyatları
Argon Gazı Ölçüm Cihazı Nereden Alınır
Argon Gazı Ölçüm Cihazı Satanlar
Argon Gazı Ölçüm Cihazı Satın Al
Azot Ölçüm Cihazı
Azot Ölçüm Cihazı Fiyatları
Azot Ölçüm Cihazı Nereden Alınır
Azot Ölçüm Cihazı Satıcıları
Azot Ölçüm Cihazı Satın Al
Gaz Ölçüm Aleti
Gaz Ölçüm Cihazı
Gaz Ölçüm Cihazı Fiyatları
Gaz Ölçüm Cihazı Nereden Alınır
Gaz Ölçüm Cihazı Satanlar
Gaz Ölçüm Cihazı Satıcıları